Equivalence assessment of creams with quali-quantitative differences in light of the EMA and FDA regulatory framework.

EMA and FDA are upgrading guidelines on assessing the quality and the equivalence of topically applied drug products for developing copies of originator products and supporting post-marketing variations. For topical products having remarkably similar composition, both EMA and FDA accept the equivalence on the bases of the comparison of rheological properties and in vitro drug release constant (k) and skin permeation flux (J) values, instead of clinical studies. This work aims to evaluate the feasibility to expand this approach to variations of the composition of complex semi-solid preparations. Ibuprofen (IB) creams at two different strengths (i.e., 1 % and 10 %) were used as a model formulation. Two formulative changes were performed: (a) the addition of the humectant to simulate a minor post-marketing variation; (b) the substitution of the emulsifying system to simulate a major one. These variations impacted only in 1 % IB formulations where both the equivalences of rheological data and J-values failed. At the highest concentration, the presence of IB crystals broke down the differences in rheological patterns and lead the IB thermodynamic activity at the maximum figuring out an overlapping of the J-values. Such data suggest the combination of these studies, which are thought mainly for the development of copies, could be also applied to the management of post-marketing variations that involve product composition.

Feeding Next-Generation Nanomedicines to Europe: Regulatory and Quality Challenges.

New and innovative nanomedicines have been developed and marketed over the past half-century, revolutionizing the prognosis of many human diseases. Although a univocal regulatory definition is not yet available worldwide, the term "nanomedicines" generally identifies medicinal products that use nanotechnology in their design or production. Due to the intrinsic high structural complexity of these products, the scientific and regulatory communities are reflecting on how to revise the regulatory framework to provide a more appropriate benefit/risk balance to authorize them on the market, considering the impact of their peculiar physicochemical features in the evaluation of efficacy and safety patterns. Herein, a critical perspective is provided on the current open issues regarding regulatory qualification and physicochemical characterization of nanosystems considering the current European regulatory framework on nanomedicine products. Practicable paths for improving their quality assurance and predicting their fate in vivo are also argued. Strengthening the multilevel alliance among academic institutions, industrial stakeholders, and regulatory authorities seems strategic to support innovation by standard approaches (e.g., qualification, characterization, risk assessment), and to expand current knowledge, also benefiting from the new opportunities offered by artificial intelligence and digitization in predictive modelling of the impact of nanomedicine characteristics on their fate in vivo.

Marketing authorisations for unmet medical needs: A critical appraisal of regulatory pathways in the European Union.

For unmet medical needs, the European Union has established fast-track regulatory pathways for ensuring patients' access to essential treatments. It is the case of the Conditional Marketing Authorisation (CMA) and the Authorisation under "Exceptional Circumstances" (EXC), which can be granted even if the clinical part of a medicinal product's dossier is not yet complete. The article aims to discuss the peculiarity of such regulatory pathways and assess the impact of their application on products' market access and penetration. A review of the regulatory history of medicines authorised with EXC or CMA has been performed on European Institutional databases (e.g., EMA portal, Union Register). Excluding vaccines, 71 CMAs and 51 EXCs were granted in the EU from 2002 and 2006, respectively, to 2022. Most CMAs have been released for the treatment of different types of tumours, while most of EXCs for alimentary tract and metabolism diseases, especially in the paediatric population, addressing unmet medical needs. Therefore, both regulatory pathways are effective for placing on the market essential medicines, preserving the initial positive benefit-risk balance. However, on average, CMAs are converted into "normal" authorisations only after a time which is significantly longer than the provided one-year renewal period, suggesting that such a regulatory pathway is still far from optimized.

3D printed mucoadhesive orodispersible films manufactured by direct powder extrusion for personalized clobetasol propionate based paediatric therapies.

The aim of this work is the development and production by Direct Powder Extrusion (DPE) 3D printing technique of novel oral mucoadhesive films delivering Clobetasol propionate (CBS), useful in paediatric treatment of Oral Lichen Planus (OLP), a rare chronic disease. The DPE 3D printing of these dosage forms can allow the reduction of frequency regimen, the therapy personalization, and reduction of oral cavity administration discomfort. To obtain suitable mucoadhesive films, different polymeric materials, namely hydroxypropylmethylcellulose or polyethylene oxide blended with chitosan (CS), were tested and hydroxypropyl-ß-cyclodextrin was added to increase the CBS solubility. The formulations were tested in terms of mechanical, physico-chemical, and in vitro biopharmaceutical properties. The film showed a tenacious structure, with drug chemical-physical characteristics enhancement due to its partial amorphization during the printing stage and owing to cyclodextrins multicomponent complex formation. The presence of CS enhanced the mucoadhesive properties leading to a significant increase of drug exposure time on the mucosa. Finally, the printed films permeation and retention studies through porcine mucosae showed a marked retention of the drug inside the epithelium, avoiding drug systemic absorption. Therefore, DPE-printed films could represent a suitable technique for the preparation of mucoadhesive film potentially usable for paediatric therapy including OLP.

Liver injury and dietary supplements: Does hydroxycitric acid trigger hepatotoxicity?

Rising rates of obesity has increased the global use of herbal supplements intended to control weight. However, taking these preparations without appropriate medical supervision could increase the risk of manifestation of side effects, especially at the hepatic level. In literature, different cases of acute liver injury consequent to the use of food supplements containing Garcinia cambogia and hydroxycitric acid are reported. This letter aims to review the most recent literature that analysed the herb-induced liver disease due to the use of hydroxycitric acid, from the first alert coming from the European Food and Drug Administration in 2009, to the last recent European food alerts from 2020 to 2021. It is noteworthy that in some cases it demonstrated the relationship between hydroxycitric acid and hepatotoxicity. Therefore, there is a need to draw more attention to the relationship between a safe use and a more awareness in the intake of these supplements, to preserve the safety of the consumers who increasingly purchase food supplements, products that have only nutritive properties and are never curative.

Design and development of topical liposomal formulations in a regulatory perspective.

The skin is the absorption site for drug substances intended to treat loco-regional diseases, although its barrier properties limit the permeation of drug molecules. The growing knowledge of the skin structure and its physiology have supported the design of innovative nanosystems (e.g. liposomal systems) to improve the absorption of poorly skin-permeable drugs. However, despite the dozens of clinical trials started, few topically applied liposomal systems have been authorized both in the EU and the USA. Indeed, the intrinsic complexity of the topically applied liposomal systems, the higher production costs, the lack of standardized methods and the more stringent guidelines for assessing their benefit/risk balance can be seen as causes of such inefficient translation. The present work aimed to provide an overview of the physicochemical and biopharmaceutical characterization methods that can be applied to topical liposomal systems intended to be marketed as medicinal products, and the current regulatory provisions. The discussion highlights how such methodologies can be relevant for defining the critical quality attributes of the final product, and they can be usefully applied based on the phase of the life cycle of a liposomal product: to guide the formulation studies in the early stages of development, to rationally design preclinical and clinical trials, to support the pharmaceutical quality control system and to sustain post-marketing variations. The provided information can help define harmonized quality standards able to overcome the case-by-case approach currently applied by regulatory agencies in assessing the benefit/risk of the topically applied liposomal systems.

Medical Device Development for Children and Young People-Reviewing the Challenges and Opportunities.

Development of specific medical devices (MDs) is required to meet the healthcare needs of children and young people (CYP). In this context, MD development should address changes in growth and psychosocial maturation, physiology, and pathophysiology, and avoid inappropriate repurposing of adult technologies. Underpinning the development of MD for CYP is the need to ensure MD safety and effectiveness through pediatric MD-specific regulations. Contrary to current perceptions of limited market potential, the global pediatric healthcare market is expected to generate around USD 15,984 million by 2025. There are 1.8 billion young people in the world today; 40% of the global population is under 24, creating significant future healthcare market opportunities. This review highlights a number of technology areas that have led to successful pediatric MD, including 3D printing, advanced materials, drug delivery, and diagnostic imaging. To ensure the targeted development of MD for CYP, collaboration across multiple professional disciplines is required, facilitated by a platform to foster collaboration and drive innovation. The European Pediatric Translational Research Infrastructure (EPTRI) will be established as the European platform to support collaboration, including the life sciences industrial sector, to identify unmet needs in child health and support the development, adoption, and commercialization of pediatric MDs.

How Do Hospital Pharmacists Approach Substitution of Nanomedicines? Insights from a Qualitative Pilot Study and a Quantitative Market Research Analysis in Five European Countries.

We conducted research to assess hospital pharmacists' familiarity with/interpretation of data requirements for the different regulatory approval frameworks and the impact of this on their approach to substitution in the formulary. The online questionnaire included a small molecule (acetylsalicylic acid-follow-ons approved via the generic pathway), two biologic drugs (insulin glargine and etanercept-follow-ons approved via the biosimilar pathway), a non-biologic complex drug (NBCD; glatiramer acetate-follow-ons approved via the hybrid pathway) and a nanomedicine, ferric carboxymaltose (no follow-ons approved as yet). The study was conducted in two phases: an initial qualitative pilot study with 30 participants, followed by a quantitative stage involving 201 pharmacists from five European countries. Most expected negligible safety/efficacy differences between reference and follow-on products. Head-to-head clinical data showing therapeutic equivalence as a prerequisite for reference product/follow-on substitution was perceived to be needed most for biologics (47%), followed by NBCDs (44%)/nanomedicines (39%) and small molecules (23%). Overall, 28% did not know the data requirements for follow-on approval via the hybrid pathway; 16% were familiar with this pathway, compared with 50% and 55% for the generic and biosimilar pathways, respectively. Overall, 19% of respondents thought the European Medicines Agency (EMA) was responsible for defining the substitutability of follow-ons. Education is required to increase hospital pharmacist's knowledge of regulatory approval frameworks and their relevance to substitution practices.

Pre-Drawn Syringes of Comirnaty for an Efficient COVID-19 Mass Vaccination: Demonstration of Stability.

Moving towards a real mass vaccination in the context of COVID-19, healthcare professionals are required to face some criticisms due to limited data on the stability of a mRNA-based vaccine (Pfizer-BioNTech COVID-19 Vaccine in the US or Comirnaty in EU) as a dose in a 1 mL-syringe. The stability of the lipid nanoparticles and the encapsulated mRNA was evaluated in a "real-life" scenario. Specifically, we investigated the effects of different storing materials (e.g., syringes vs. glass vials), as well as of temperature and mechanical stress on nucleic acid integrity, number, and particle size distribution of lipid nanoparticles. After 5 h in the syringe, lipid nanoparticles maintained the regular round shape, and the hydrodynamic diameter ranged between 80 and 100 nm with a relatively narrow polydispersity (<0.2). Samples were stable independently of syringe materials and storage conditions. Only strong mechanical stress (e.g., shaking) caused massive aggregation of lipid nanoparticles and mRNA degradation. These proof-of-concept experiments support the hypothesis that vaccine doses can be safely prepared in a dedicated area using an aseptic technique and transferred without affecting their stability.

Relevance of production method on the physical stability and in vitro biopharmaceutical performances of olanzapine orodispersible film.

This study assessed the relevance of the preparation process, namely solvent casting and hot-melt ram printing, on the biopharmaceutical performances of olanzapine orodispersible films (ODF) made of maltodextrins. Beside the clinical rationale, olanzapine was selected since it is subjected to polymorphism which impacts on its bioavailability. All ODF disintegrated in less than 3 min and showed content uniformity within the acceptable values. Dissolution testing in 3 mL of artificial saliva at pH = 6.8 evidenced that cast and printed ODF released after 5 min about 2% and 100%, respectively; at higher volume, a yellow precipitate was formed after disintegration of the cast ODF. At pH = 1.2, the t85% for cast ODF was reached after about 20 min and only the 90% olanzapine was dissolved increasing the pH to 6.8. These differences were explained by DSC, TGA and X-ray diffraction data which demonstrated that the casting method, which included the preparation of an aqueous slurry, favours the conversion from Form I to a hydrated one. Since extruded ODF resulted physically stable after 30 months, this suggests the potentiality of this technique to load in ODF drugs undergoing solid-state modification after exposure to aqueous media.

Extemporaneous printing of diclofenac orodispersible films for pediatrics.

OBJECTIVE: The possible application of a hot-melt ram extrusion printing to the preparation of diclofenac orodispersible films (ODF) made of maltodextrin was studied focusing the attention on the effects of taste-masking agents (i.e. namely mint, licorice-mint, and sucralose) and an opacifier (titanium dioxide [TiO2]). SIGNIFICANCE: This is a proof-of-concept of the feasibility to print ODF loaded with a thermosensitive drug substance by hot-melt technologies. METHODS: Diclofenac sodium (DNa) ODF made of maltodextrin (dextrose equivalent (DE) = 6 ) plasticized with glycerol were prepared by hot-melt extrusion printing. ODF were characterized for disintegration time, drug content, and solid state, in vitro dissolution in deionized water and simulated salivary fluid at pH 5.7, tensile, and adhesive properties. Moreover, the stability of ODF was assessed in accelerated conditions over six months. RESULTS: After the preparation, no variation in drug solid state was evident and the formation of impurity A of DNa was detected, even if it remained below the Pharmacopoeia (Ph. Eur.) limits (< 0.2%). Only the addition of DNa significantly improved the ODF tensile properties: the tensile strength increased from 0.17 ± 0.03 MPa (placebo ODF) to 2.21 ± 0.54 MPa (p ≤ 0.03). All ODF disintegrated in about 1 min, and the t80% was lower than 3 min. TiO2 reduced the static and dynamic peel forces (p ≤ 0.006) favoring the ODF detachment from the primary packaging material. During the accelerated stability study, ODF were easy to handle without fracture; the drug content, impurity A, and dissolution profiles remained superimposable. CONCLUSION: Hot-melt printing can be suitable to prepare palatable ODF loaded with bitter thermosensitive drugs.

Considerations on D-mannose Mechanism of Action and Consequent Classification of Marketed Healthcare Products.

Urinary tract infections (UTIs) are very common disorders that affect adult women. Indeed, 50% of all women suffer from UTIs at least one time in their lifetime; 20-40% of them experience recurrent episodes. The majority of UTIs seems to be due to uropathogenic Escherichia coli that invades urothelial cells and forms quiescent bacterial reservoirs. Recurrences of UTIs are often treated with non-prescribed antibiotics by the patients, with increased issues connected to antibiotics resistance. D-mannose, a monosaccharide that is absorbed but not metabolized by the human body, has been proposed as an alternative approach for managing UTIs since it can inhibit the bacterial adhesion to the urothelium. This manuscript discusses the mechanisms through which D-mannose acts to highlight the regulatory aspects relevant for determining the administrative category of healthcare products placed on the market. The existing literature permits to conclude that the anti-adhesive effect of D-mannose cannot be considered as a pharmacological effect and, therefore, D-mannose-based products should be classified as medical devices composed of substances.

Trends in the Characterization Methods of Orodispersible Films.

The recent increased interest in orodispersible films (ODF) stems from their ideal potential to circumvent several pharmacotherapy-related problems, such as improved medication compliance and adherence, especially in children, elderly and uncooperative patients. Their administration is well accepted by the majority of patients because ODF dissolve upon contact with the saliva in the oral cavity without the need for water intake. ODF application in personalized pharmacotherapy is currently being exploited. Moreover, innovative preparation methods and characterization technologies have been evolving in recent years, highlighting a promising future both from the technological and clinical standpoints. However, the key obstacles to the attainment of full potential of ODF in the pharmaceutical field is the lack of harmonized and well-defined quality characterization procedures, standard evaluation parameters, guidance on appropriate final product properties and specifications. This review provides an appraisal on the ODF characterization methods from slurries to the finished medicinal products with a specific focus on the technologies suitable for identification, quantification, and quality evaluation of extemporaneously prepared ODF on small batches in individualized pharmacotherapy. Generally, there is a paradigm shift from the use of the conventional quality evaluation tools and/or protocols for oral solid dosage forms to characterize ODF to more specific equipment and procedures that suit the peculiarities of the ODF.

Topical Administration of Cannabidiol: Influence of Vehicle-Related Aspects on Skin Permeation Process.

Cannabidiol (CBD) is a non-psychoactive cannabinoid isolated from Cannabis sativa which, given its claimed beneficial properties and therapeutic potential, has lately aroused considerable attention from the scientific community. Starting from the little literature evidence, the main purpose of this study was to investigate the topical administration of CBD, with particular focus on the influence of vehicle-related aspects on the skin permeation process. This could provide useful information for the design of suitable drug delivery systems which could be used in developing topical medicines and cosmetics. In vitro human skin permeation studies were conducted using modified Franz diffusion cells to compare the performance of four solutions and two semisolid formulations. The Hildebrand solubility parameter was used to better understand the thermodynamic aspects implied in the partitioning process of the cannabinoid compound into the skin. It was interestingly found that a hydrophilic gel, mostly consisting of propylene glycol (79%, w/w), can be an optimal choice for the topical administration of CBD. Moreover, the feasibility of the preparation of CBD-loaded (trans)dermal patches, made with new printing technology, was also demonstrated.

Community Pharmacist's Role in Detecting Low Back Pain, and Patient Attitudes-A Cross-Sectional Observational Study in Italian Community Pharmacies.

BACKGROUND: Low back pain (LBP) is one of the most frequent diseases for which patients seek advice in a community pharmacy. The study aimed to evaluate the feasibility of the administration by community pharmacists of questionnaires to assess the LBP intensity and disability degree in patients entering community pharmacies and the attitudes they have toward pain management by pharmacological and non-pharmacological strategies. METHODS: An explorative, cross-sectional, observational, and quantitative study was performed. Twelve Italian community pharmacists were asked to submit a questionnaire on LBP to patients visiting their pharmacies. The questionnaire included a pain intensity scale, and two validated tools: the Roland and Morris Disability Questionnaire (RMDQ) and the Start Back Screening Tool (SBST) to determine the degree and risk of patient disability, respectively. RESULTS: 872 patients filled out the questionnaires in 6 months. No statistical differences between genders (p > 0.30) were recorded for pain intensity (Female: median score 6, IQR 4-7; Male: median scores 5, IQR 4-7; p > 0.30) and disability associated with LBP (RMDQ high-disability level: Females, 14.7%, Males, 15.0%; p > 0.90). Most of the patients (69%) reported a low degree of disability, but the risk of disability was medium and high in 36% and 18% of them, respectively (p < 0.05). About 14% of patients declare to never seek for physician's advice despite their medium-high degree of disability. CONCLUSION: The study demonstrated the feasibility of validated tools for assessing the degree and risk of disability in LBP patients administrable in community pharmacies. Moreover, the community pharmacy resulted in an important care portal for patients suffering from moderate LBP and for intercepting patients who suffered from severe LBP but had never reported their problem to their physician.

Design of pressure-sensitive adhesive suitable for the preparation of transdermal patches by hot-melt printing.

This work aimed to design low-melting pressure sensitive adhesives and to demonstrate the feasibility of the preparation of (trans)dermal patches by hot-melt ram extrusion printing. This approach allows defining both the geometry of (trans)dermal patch and the drug strength easily according to patient needs. The preparation steps are the mixing of a poly-ammonium methacrylate polymer (i.e. Eudragit RL and RS) with a suitable amount of plasticizer (triacetin or tributyl citrate) and drug (ketoprofen or nicotine), the melting in the ram extruder, and the printing on the backing layer foil. The formulations were characterized in terms of rheological and adhesive properties, in vitro drug release and skin permeation profiles. The (trans)dermal patches made of Eudragit RL or Eudragit RS plasticized with the 40% triacetin could be printed at 90 °C giving formulations with suitable adhesive properties and without cold flow after 1 month of storage at 40 °C. Furthermore, the overall results showed that the performances of printed (trans)dermal patches overlapped those made by solvent casting, suggesting that the proposed solvent-free technology can be useful to treat cutaneous pathologies when the availability of (trans)dermal patches with size and shape that perfectly fit with the skin area affected by the disease improves the safety of the pharmacological treatment.

Old active ingredients in new medicinal products: is the regulatory path coherent with patients' expectations?

The rising costs of new medicinal products are a challenge to the economic sustainability of national healthcare systems in ensuring patients' access to therapies. European Union (EU) and US legislators have provided regulatory pathways aimed at simplifying Marketing Authorization (MA) applications for new medicinal products in cases when safety and efficacy profiles can be derived from the data of already-marketed products. In this review, we discuss the different regulatory pathways towards the MA of new medicinal products containing old drug substances and intended to improve the therapeutic value of a treatment, to obtain a new therapeutic indication (drug repositioning), or to ensure the same therapeutic value of a reference product at lower costs.

New regulatory strategies to manage medicines shortages in Europe.

Medicine shortages have been spreading in European countries. In many cases, the unavailability of medicinal products has a substantial impact on the capability of National Healthcare Systems in ensuring the continuity of care. Shortages originate from multifactorial causes. In particular, they can be due to supply-related factors (e.g., manufacturing issues, regulatory issues, logistics, distribution) and demand-related ones (e.g., fluctuating drug demand, parallel market, tendering, price and reimbursement policies). However, some extraordinary geopolitical events (e.g., Brexit) may also affect medicines' availability. The capability of European Regulatory Authorities and other stakeholders, which are involved in the pharmaceutical distribution chain and the healthcare assistance services, to define suitable problem-solving strategies has been limited for years by the fragmentation of the European regulatory framework, starting from the lack of a univocal definition of a medicine shortage. Only in 2019, the EMA and HMA joint task force released the first harmonized "shortage" definition in the European Economic Area (EEA) and guidance on public communication. This manuscript aims to review the current European regulatory framework on medicine shortages. To support the activities of regulators, manufacturers and other healthcare professionals, an algorithm was also proposed to be used as a harmonized procedure to determine the shortage/unavailability impact on public health and to rationalize the problem-solving strategies adopted in all different settings.

Trends in the production methods of orodispersible films.

Interest in orodispersible films (ODF) is growing day-by-day, since this dosage form overcomes some therapeutic obstacles, such as impaired swallowing, and offers several benefits, such as the possibility to adapt the dosing requirements for a subset of patients. As a consequence, technologies to produce ODF have risen attention for possible applications in the development of patient-centric formulations. This review critically discusses current trends in the technology platforms proposed to manufacture ODF, including the innovation and opportunities to produce very small batches in a pharmacy setting. Although the main Pharmacopoeias recommend testing customized dosage forms for quality assurance, pharmaceutical assays are a matter of debate due to the complexity and high cost of conventional methods. Alternatively, non-disruptive online analytic methods can be proposed to assay ODF properties, above all to assure the uniformity of drug content.

Regulatory aspects and quality controls of polymer-based parenteral long-acting drug products: the challenge of approving copies.

To assure the safety and the efficacy of a medicinal product, quality and batch-to-batch reproducibility need to be guaranteed. In the case of parenteral long-acting products, the European Union (EU) and US Regulatory Authorities provide different indications, from the classification to the in vitro release assays related to such products. Despite their relevance, there are few in vitro experimental set-ups enabling researchers to discriminate among products with different in vivo behaviors. Consequently, most copies are authorized through hybrid instead of generic applications. Here, we review the actual regulatory frameworks to evaluate the in vitro release of drugs from polymer-based long-acting parenterals to highlight the directions followed by the Regulatory Agencies in the USA and EU.